Tag Archives: Ironport

May 07

Deploying Ironport Cisco Web Security Virtual Appliance

Posted on by

Prerequisites

  • Download OVF file from Cisco.com. Use a CCO login that has access to the WSA download section.
  • Ensure you have received a PAK License ID from Cisco. This should have been received via email
  • Generate a License file from cisco.com/go/license

Installing Ironport Cisco Web Security Virtual Appliance

  1. Log into your VMware VCentre Console. Deploy OVF file

2.   Browse to OVF file location

2

3.   Specify Name for the Device. Eg vWSA-01

4.   Specify the Datastore to install the Device.

5.   Select ‘Thin Provision’. Default is Thick provision, this will consume 1TB of data, includes whitespace.

5

6.   Map the Network to the correct Port Groups.

6

7.   Power on the VM

8.   Default username and password

U: admin

P: ironport

9.   Set the Time on the vWSA

Settime

MM/DD/YYYY HH:MM:SS

10.   Commit changes. Commit cmd

11.   Copy license to vWSA. FTP to vWSA device and browse to the ‘Configuration’ Directory. Copy the license.xml to this directory.

12.   Upload License. SSH to the vWSA device. Type ‘loadlicense’ select option 2 to upload from xml file.

12

13.   Accept License Agreement

14.   Browse to the GUI. https:// 192.168.0.2:8443 or http://192.168.0.2:8080

15.   Run System Setup Wizard via the System Menu.

15a

15b

15c

15d

15e

15f

15g

15h

16.   Click ‘Install this Configuration’ to complete the setup wizard.

This is just the initial install steps for Ironport. I’ll write up some more posts on Ironport configuration in the future. There are a lot of variations to the configuration.